Wellpoint Dewatering Systems

Wellpointing

Godwin wellpoint pumps, by Xylem, are used specifically for pumping water out of the ground before and during excavation. When the water level below ground is higher than the excavation, the water level must be lowered to have a dry hole when excavating. Self-jetting Godwin wellpoint pumps and header pipe complete a dewatering system that's easy to transport and set up. With up to 20° deflection at header coupling joints, the pipes easily conform to site and ground conditions without loss of suction or pressure integrity.

Godwin Construction Dewatering Systems

The Godwin MV Series is a complete line of wellpoint pumps available for rental or sale. Godwin wellpoint pumps are capable of maximum flow rates from 750 to 3100 gpm (47 to 196 l/sec.), total heads from 115' to 180' (35.1 to 54.9 meters), solids handling up to 3-1/8" (79mm) in diameter and air handling capabilities to 200 cfm (5.7 cubic meters/min.). Each pump includes a centrifugal, single stage end suction pump with high volume, belt driven vacuum pump and single action float air water separation tank. Additional features include hardened wearparts and a dry running oil bath mechanical seal.

Self-jetting Godwin wellpoints and header pipe complete a system that is easy to transport and construct. With up to 20 degree deflection at header coupling joints, the pipes adapt easily to site and ground conditions without loss of suction and pressure integrity.

Download Spec Sheet